| Agitation | Drive | DC motor, AC Gear motor top drive motor (mechanical drive) | 
| Range | 50-550 rpm 1 rpm | 
| Sensor | Magnetic hall sensor | 
| Impellers | Turbine impeller (SUS 316L) Foam breaker (SUS 316L)
 | 
| Control | Microprocessor based PID | 
| Temperature | Range | From 3 above the cooling water temperature to 80 (accuracy 0.1) | 
| Control | The temperature is automatically controlled by the external heat exchanger system | 
| Sensor | RTD (Pt-100) | 
| Aeration | Sparger | Ring sparger (SUS 316L) | 
| Inlet filter | The cartridge type sterilizable pleated type 0.2μm absolute filter is applied | 
| Outer filter | Same as inlet filter specification (optional item) | 
| Control range | Different vessel size and/or ordered specifications | 
| Materials and finish | Vessel | Using 316L stainless steel it is polished mechanically and/or electrically | 
| Piping | 316L stainless steel prevents contamination and is polished by electrically | 
| O-rings/gaskets | Viton or silicone material is used for the O-ring and the EPDM is used for the gasket | 
| Control unit | Panel | 8.5" Graphic Color LCD, membrane keypad | 
| Communications | Memory stick, printer, computer with the RS-232C communication protocol | 
| Controller board | Microprocessor based integrated controller board is adopted to measure, control and display the fermentation system | 
| Pressure control | The pressure is controlled manually and/or automatically | 
| Power supply | 220V 50/60Hz single phase, 380V 50/60Hz three phase |